7” Empire Chaser Series
These NEW bad boys are the exact change we wanted to bring to you! The Empire Chaser Series offers a solid 105W LED Power, High Beam output of 5500 lumen per light, Low Beam output of 3500 lumen per light. These are DOT Approved with SAE Certification and have a low beam cutoff. The RGB colors are now controlled by a Bluetooth App and offer several choices of RGB Backlighting, modes, chasing, multiple color craziness, with full control of speed and brightness. These headlights also offer the option of additionally wiring in turn signals and running lights!
Headlights Only version comes with 2-headlights and a 2way Bluetooth controller
Headlights with 4” fog lights combo comes with 2-headlights and 2-4” fog lights and a 4way controller.
Comes with the rebreather hole at the back side, to help solve the problem of moisture inside
Each headlight has a 6000 - 6500k color temperature
Operating Lumens Output: 5500LM (105W High Beam), 3500LM (65W Low Beam).
To fit these on a JL you will need the following 9" to 7" headlight adaptor
To fit these on a JK you will need a H4-H13 connector (included with most headlights)
To fit these on a TJ you just need the light
Education and transparency are so important to us that we would rather lose you as a customer than for you to be misinformed about what you are buying from us! Please read the following before making your purchase so that you can be prepared for a successful install!
Every vehicle has uniqueness’s that can become frustrating when installing a product without much experience doing so. We pride ourselves on our excellent customer service and are here to help you through the entire process of installing our products. Please reach out to us if you do not understand the install process OR if you need help or advice with it. The last thing that we want you to do is finish and realize you have to redo part of it because something was missed. If you are not comfortable with automotive wiring or simply suck at it, PLEASE call a friend who is comfortable or a local auto shop for help.
Plug-n-play refers to the main headlight. This means that the headlight plugs into an adapter, which plugs into the factory wiring harness for the headlight to work. If there are color options with a wiring harness or you want to wire the headlights to your daytime running lights or turn signals, additional wiring is required. These options are not plug-n-play and require general knowledge about automotive wiring. Again, if you are not comfortable with automotive wiring or simply suck at it, PLEASE call a friend who is comfortable or a local auto shop for help.
With any LED headlights, we highly recommend including an anti-flicker harness to ensure that the headlights do not flicker. Our headlights include a H4-H13 adapter so that they are plug-n-play. However, this adapter is NOT an anti-flicker harness. BUT, we do sell anti-flicker harnesses. Why do we sell them separately? Many people already have anti-flicker harnesses with their current LED headlights. By offering anti-flicker harnesses as add-ons for the people who need them, we keep the headlight prices lower for you! If our headlights are flickering and you don't have anti-flicker harnesses, you didn't read this ;) Click here for our Anti-Flicker Harness
When wiring headlights to turn signals, we also recommend using a 50W LED 6ohm load resistor between the headlight turn signal wire and the factory turn signal wire. This resistor will prevent the turn signals from hyper flashing. You can add these resistors HERE
After successfully installing your awesome new headlights, you will need to check the height and evenness of their beam pattern. This is very important for safe nighttime driving. If you do not know how to adjust this, simply Google "how to adjust jeep jk headlights" and learn a new skill!
We are excited for you to LOVE our products! Again, if you need help or advice with the install process, please reach out to us. Regardless, NEVER GIVE UP!!!