Shopping Cart
DS18 JP6 Plug and Play Dash Speakers Enclosure Pods Including 6" Neodymium Speakers Left and Right 300 Watts for JL/JLU,JT Gladiator Jeeps
DS18 JP6 Plug and Play Dash Speakers Enclosure Pods Including 6" Neodymium Speakers Left and Right 300 Watts for JL/JLU,JT Gladiator Jeeps
DS18 JP6 Plug and Play Dash Speakers Enclosure Pods Including 6" Neodymium Speakers Left and Right 300 Watts for JL/JLU,JT Gladiator Jeeps
DS18 JP6 Plug and Play Dash Speakers Enclosure Pods Including 6" Neodymium Speakers Left and Right 300 Watts for JL/JLU,JT Gladiator Jeeps

DS18 JP6 Plug and Play Dash Speakers Enclosure Pods Including 6" Neodymium Speakers Left and Right 300 Watts for JL/JLU,JT Gladiator Jeeps

$199.95

DS18 is proud to offer the only plug and play front speaker kit for the Jeep JL, JLU, and JT. This easy to install ensure comes with everything you need preassembled to get amazing sound out of your front stage with high powered DS18 Neodymium pro audio speakers! These 6.5 Neos are rated at 150w RMS and 300w peak power so you will get much more sound and clarity in just a few minutes of installation time. These plug right into your existing wiring harness and connections and can be powered easily by your factory amplifier. Alternatively, you can add an external amplifier for even more power and loudness!

Highlights

  • True plug and play ensure only requiring some simple hand tools to install in less than 30 minutes for both.
  • DS18 Neodymium Pro audio 6.5 speakers included rated at 150w RMS and 150w Peak power for the loudest sound and highest wattage to decibel efficiency.
  • Especially designed for Jeep JL, JLU, and JT plug and play installation.
  • The units use the factory amplifier but alternatively can be powered for even more volume with an external amplifier. 

 

 

 

Download JP6 Product Manual  

Specifications
Nominal Diameter 6.5"
Nominal Impedance 4 Ohms
RMS Power Handling 150 Watts
MAX Power Handling 300 Watts
Sensitivity (1w/1m) 96 dB
Frequency Response 100Hz - 10KHz
Recommended HI Pass Crossover 120Hz
Motor
Voice Coil Diameter 1.5"
Voice Coil Former Material Kapton
Winding Material CCAW
Cone Material Paper
Surround Material Cloth
Basket Material Steel
Magnet Material Neodymium
Magnet Weight 3 Oz
Thiele & Small Parameters
Equivilant Volume Vas 4.463 Ltr
Excursion (one way) Xmax 1.5 mm
Free Air Resonance Fs 138 Hz
Mechanical Factor Qms 4.249
Electrical Factor Qes 0.977
Total Factor Qts 0.794
Mechanical Mass Mms 7.166 gr
Mechanical Compliance Cms 148.927 u/M/N
BL Factor BL 4.767
Voice Coil Inductance Le 0.08696mH
Cone Area Sd 145 cm²
DC Resistance Re 3.2 Ohms
Mechanical Mass w/o air Mmd 6.159g

Download JP6 Product Manual 

 

Specifications
Nominal Diameter 6.5"
Nominal Impedance 4 Ohms
RMS Power Handling 150 Watts
MAX Power Handling 300 Watts
Sensitivity (1w/1m) 96 dB
Frequency Response 100Hz - 10KHz
Recommended HI Pass Crossover 120Hz
Motor
Voice Coil Diameter 1.5"
Voice Coil Former Material Kapton
Winding Material CCAW
Cone Material Paper
Surround Material Cloth
Basket Material Steel
Magnet Material Neodymium
Magnet Weight 3 Oz
Thiele & Small Parameters
Equivilant Volume Vas 4.463 Ltr
Excursion (one way) Xmax 1.5 mm
Free Air Resonance Fs 138 Hz
Mechanical Factor Qms 4.249
Electrical Factor Qes 0.977
Total Factor Qts 0.794
Mechanical Mass Mms 7.166 gr
Mechanical Compliance Cms 148.927 u/M/N
BL Factor BL 4.767
Voice Coil Inductance Le 0.08696mH
Cone Area Sd 145 cm²
DC Resistance Re 3.2 Ohms
Mechanical Mass w/o air Mmd 6.159g